wire type underfloor heating

June 25 2022

Is it true that heated floors consume a lot of electricity?

Andrew Concrete floor heating cables, Floor Heating, heating control, Radiant underfloor heater Concrete floor heating cables, heating controls, radiant floor heaters, underfloor heating systems, wire type underfloor heating

One of the most common worries regarding radiant heat flooring is the amount of energy the system would consume and its comparability to other services. The good news is, not only is radiant heat comparable, but the efficiency of the system will likely save you money in the long term. Below, we dive into some of the specifics about the amount of electricity heated floors need.

Heated Floor Electricity Specifics

Most heated tile floors and electric floor heating systems consume 12 watts per hour per square foot, which means a 100-square-foot room consumes 1200 watts total per hour. This means that the even, efficient heat provided by a floor heating system might potentially save money almost immediately.

How To Calculate Radiant Heat Costs

By following this approach, you can acquire a prospective estimate of costs:

Determine the square footage of heated space in your facility. You can generate an estimate by multiplying the total square footage of the room by 0.9.
Because most systems utilize 12 watts per square foot, double the heated area by 12.
Now divide the total number of watts by 1000 to get the number of kilowatts the system will use every hour. (KW is the unit of measurement used by electric companies to calculate monthly bills.)
Finally, multiply the number of kilowatts used per hour by the cost of electricity per kilowatt in your area. The average cost per KW is around.12.

May 14 2022

What kinds of furniture can be placed on top of underfloor heating?

Andrew Floor Heating, underfloor heating underfloor heating systems, wire type underfloor heating

The majority of free-standing furniture can be placed directly on top of underfloor heating. To avoid hotspots created by a lack of circulation around specific regions, furniture (chairs, beds) installed on underfloor heating systems should have a ground clearance of 2-3 inches or roughly 10cm.

Also, when placing items such as dog beds or thick rugs over underfloor heating, you must exercise caution because they can reduce heat distribution, cause discoloration of floor coverings (e.g., carpets), and create hotspots, which can eventually lead to fire outbreaks in cases where carpets are used as floor coverings.

Underfloor heating is commonly used with stone and tile flooring. This is due to their superior thermal conductivity and ability to transmit heat to the floor’s surface. Because the primary aim for installing underfloor heating is to maximize heat transfer, furniture that will not interfere with heat transfer can be put on top of the underfloor heating.

The loose wire form of underfloor heating is intended for use in bathrooms and kitchens with fixed equipment (such as sinks, baths, and cupboards), as it can be maneuvered around those permanent sections. This will avoid the production of hot spots, which can cause damage to the floor if air circulation is inadequate.

It is normally safe to set furniture on a hot floor, but you must use caution. You must verify that neither the furniture nor the underfloor heating are not damaged.