Close
Menu
Cart

Radiant underfloor heater

1_Perseo-Alpine-Roomset-e1607604925770

Is it safe to use electric underfloor heating?

, , ,

Electric underfloor heating is an excellent method to increase the sustainability of your house, and because electric systems use mains-connected energy, it is normal that you have concerns about the safety of installing these systems. In this article, we’ll go through the many ways Heatec’s electric floor warmers have been developed to keep you safe. You will discover:

  • Why is there no danger of electric shock with floor heating?
  • Our technology’s safety accreditations
  • Top tips for installing electric floor heating safely
  • How might floor heating assist with allergies?
  • Our guarantees offer you with peace of mind.

Is electric floor heating dangerous?

Concerned about the possibility of receiving an electric shock while installing underfloor heating? Don’t be. Our electric floor heating systems go through a thorough research and development process, resulting in a totally safe product with almost no risk of shock.

Is installing UFH in a wet room safe?

Floor heating is a particularly common heating solution for bathrooms. After a pleasant shower, the subtle warmth created by floor heaters significantly boosts comfort levels and adds a true feeling of luxury to chilly tiled bathroom floors. One of the concerns that individuals may have when putting an electric system in their bathroom is whether or not the system will be safe, given that water and electricity may be a deadly mix. Yes, electric underfloor heating is a highly safe method of heating thanks to Heatec’s cutting-edge technology, which avoids any inadvertent injury to you before, during, or after installation.

Is it safe to use floor heating if you have allergies?

Another advantage of electric underfloor heating is that the heat radiating from the floor not only increases comfort levels but also improves the air quality of a space when compared to alternative heating systems. Conventional heating methods focus on heating the air of a space, which increases the movement of dust and can cause breathing problems for allergy sufferers, whereas underfloor heating uses radiant heat technology to directly warm the people and objects in the space, keeping the air fresh and clean. Traditional heating methods also lower the humidity in the space, making the air dry and unpleasant. Floor heating is therefore highly recommended for allergy patients.

If you have any questions or need assistance with your UFH system, please contact Heatec at (07) 38062326.

living room - heating

Is it safe to leave my underfloor heating on all day?

, , , , , , , ,

Is it safe to leave my underfloor heating on all day? We are all aware that as compared to a standard radiator setup, a well-installed and insulated wet underfloor heating system may save households money on their heating expenditures.

Furthermore, unlike a radiator system, which may require frequent checks and bleeding, underfloor heating is incredibly dependable and requires very little care.

But one question remains: how to get the maximum efficiency out of the system. Is it safe to leave my underfloor heating on all day?

Take a look at the following tips to help you make the most of your radiant heating system in order to optimize possible savings while keeping a warm and pleasant living area.

Is it best to leave my underfloor heating on all day?

In a nutshell, sure, but it does depend on the season.

Keeping the underfloor heating on throughout the cold months ensures faster reaction times when the warmth is required. It may seem strange to leave the heating on when everyone is gone for the day, but underfloor heating can take two or three hours to warm up from stone cold.

This is because the screed over the heater elements requires time to transmit heat and radiate it up through the floor to create the desired air temperature.

However, if kept on at a low heat, it may soon heat up to a comfortable level.

Nevertheless, it is still important to control the temperature overnight by efficiently managing your thermostats.

Use thermostats efficiently

A decent underfloor heating system should be highly programmable, and thanks to the rising popularity of smart thermostats, many are now remotely accessible via mobile devices. This offers you complete control over your system, ensuring that no energy is wasted when it is not required.

A correctly built system should also allow the family to choose the temperature they want in each room during the day, a process known as ‘zoning.’ Installing contemporary heating controls in a house may save a family up to 40% on their energy expenditures.

It’s a good idea to use your thermostats to lower the air temperature to the mid-teens overnight. Setting them to warm up in the morning will provide you with a pleasant temperature to begin the day and make getting out of bed simpler. Then, once everyone has left, return them to a resting temperature during the day if no one is in.

Again, you can do all of this using your control panel. Setting it up right will ensure that it begins warming automatically before anyone arrives home, ensuring that they return to a comfortable and inviting temperature.

Use heating only when necessary

Many families, particularly those with bigger houses, may discover that they utilize some rooms every day and others just sometimes.

During the colder months, it’s a good idea to restrict the amount of heat used in rooms that aren’t frequently occupied (spare bedrooms, dining rooms, etc.) and instead prioritize heating in social spaces.

A zonal control system allows you to individually set the temperature of each room, allowing you to experience the comforting comfort of radiant heating where you need it most – without wasting energy elsewhere.

greenhouseseedlings

Propagation Bottom Heats

, , , ,

When propagating plants, particularly stem cuttings, providing bottom heat helps optimize root development without heating (and so drying off) the tops of the plants. It may be used to produce the optimal environment for plant growth – cool tops and warm bottoms!

Bottom heat can be provided in a variety of methods, including:

  • Buy a propagator with built-in base heating. These can range in size from windowsill propagators to enormous greenhouse propagators.
  • Soil warming wires should be placed in damp sand with at least 5cm of sand above and below them. If the cables are buried exactly beneath an enclosed enclosure, such as a propagation case, this is most effective for propagation. Cables are available for a variety of applications, including propagation units, general greenhouse heating, and cold frame warming, so make sure you choose the proper one.
  • Place a non-heated propagator under an electric blanket (one meant for the purpose, not a bed warming electric blanket).
  • Layer fresh straw horse manure, soil, and a sprinkle of lime to create a ‘hot bed’ in your greenhouse borders (to neutralize the acidic manure). Make three layers of these and allow it for a few days to heat up before using.

Where possible, seek to select a heating solution with thermostatic control (with the exception of the ‘hot bed’ solution) so that you can guarantee the proper degree of heat is provided to the plants and that you are not overheating them.

It is critical to keep the clear cover over the plants while utilizing a heated propagation unit to preserve moisture.

Radiant-Under-Floor-heater-temperate-warm

How Long Does It Take to Warm Up Underfloor Heating?

, , , , ,

When you’ve finished installing all of the flooring and the weather begins to cool, you may use your underfloor heating system to keep warm. Only to be left shivering till early am since the heated floors do not appear to be working correctly. Many people forget how long it should take for heated flooring to warm up.

Electric underfloor heating begins to warm up instantly and reaches operational temperature in a matter of minutes. It might take up to three hours for water-based underfloor heating to reach full working temperatures from cold. The heating components in your floor will heat up far faster than the room temperature.

Understanding the best forms of underfloor heating for your house and how they will effect the total temperatures that you may enjoy can have a significant impact on how you use the heating system. Many homeowners who use underfloor heating for the first time make the mistake of treating it like regular heating. You must learn how underfloor heating works and which methods are appropriate for your house.

How long does it take for underfloor heating to heat up? – Water vs. Electric

Two methods of heating have grown popular among homes worldwide in the area of underfloor heating. Each has different advantages and downsides. The rate at which radiant heating heats your house is the most important of them.

Water-based heating has been viewed as the preferable long-term heating option for homes that are still being built, with the heating elements requiring more in-depth construction than can be done in a building that has already been completed.

While electric underfloor heating provides a versatile solution for individuals looking to retrofit heating into their homes, it also expands the places in which it may be employed.

It will take some time for the heat from the electric panels or the water in the pipes to radiate upwards and raise the ambient temperature of the air in your home.

The time it takes for underfloor heating heat to radiate into the home is determined on the system utilized, your flooring, and any screed and insulation installed.

winter-season

A brief guide on preparing your heating system for the winter season

, , ,

The weather is dropping and the nights are drawing in, which means it’ll only be a matter of weeks until we all go for the thermostat and put our heating back on.

Unfortunately, after months of having our thermostats turned all the way down, it’s inevitable that for some homeowners, putting their boilers back on would result in them discovering difficulties exactly when they need their warmth the most.

As you deal with these emergency call outs, October and November are among the busiest months on the calendar for plumbers and heating professionals, frequently resulting in lengthy hours as you try to get to as many people as possible. While there isn’t much you can do to prevent a late-night call from a client whose boiler won’t switch on, there are things homeowners can do to assist maintain their underfloor heating in good working order, reducing the likelihood that they will need to make that urgent call.

Some fast heating tests you may perform now

Visual inspection: Locate the manifold and examine it as well as the surrounding pipes. Take a snapshot of any signs of a leak or anything you are unsure about and email it to your plumber. If you need to inspect those hard-to-see places, use a torch.

Tissue check: If you suspect a minor leak, clean the area with tissue and then wrap a clean piece of tissue around the point to keep it from falling off. Every day or so, check the area. There is a leak if the tissue paper becomes wet again.

Pressure check: Locate the pressure gauge for the heating system (this could be next to the expansion tank, which is usually a big red cylinder the size of a beach ball, built into the boiler, or sited close to the boiler). The gauge should normally be between 1 and 1.5 bar. Contact your plumber if it is higher or lower.

Check the batteries: If you have thermostats with batteries, check them and replace them as needed.

Turn everything on: Start the system by raising the thermostat to create a demand for heat. Open all thermostatic radiator valves and set any time switches to operate 24 hours a day. Examine all of your radiators for leakage.

Listen for noises: Can you hear any strange noises when you turn the system on? What kind of sounds are they? Do they come to a halt when the system warms up? Can you figure out where the noise is coming from? All this is vital information for your plumber.

Schedule a system service: This is the greatest approach to prepare for winter, but your heating engineer will rapidly get overworked as the temperature cools. Make an appointment early (like now) to ensure a trouble-free winter. Having the service completed early ensures that if anything needs fixing or replacing, you will have enough time to do it before the weather becomes bitterly cold.

under-floor-heating

Is underfloor heating as good as radiators?

, , , , ,

Radiators were formerly the obvious choice for heating a room, but UFH is now so adaptable that it can be put – and enjoyed – in almost any home. This raises the dilemma of whether to use underfloor heating or radiators. Which is the best solution for me, and can underfloor heating completely replace radiators?

Underfloor heating may be installed in every room of your house. You’re guaranteed to discover the appropriate option for your heating needs, from water to electric underfloor heating, and from low profile to screed UFH systems. We recognize that there may be times when you wish to maintain existing radiators in certain sections of your house.

Understanding how various heating systems function can help you decide which one is best for your house. Each heating system has unique characteristics and benefits.

No cold spots or draughts: Because UFH warms from the floor up (providing an even heating profile devoid of draughts and cold spots), and because it is controllable, it heats rooms precisely. Warm water from the manifold(s) is circulated through the piping, slowly warming the floor and producing a pleasant environment.

Thermostats are used to control UFH: one thermostat per room or zone is used to establish the desired temperature. Because UFH is divided into zones, it is more controlled than radiators.

At least 25% more energy efficient: UFH heats your home without the use of supplementary heating. UFH has a larger surface area than radiators, utilizes lower water temperatures, and is more efficient – up to 40% more efficient when combined with a heat pump than radiators.
Warm heated floor: One of the most significant advantages of UFH is the feeling of warmth underfoot. It gives the place a rich atmosphere. There will be no more frigid tiles or rough flooring.

It is a virtually unnoticeable heating system since the sturdy and flexible plastic tubing is concealed beneath the floor. The system’s heart, the manifold, is hidden away in a cabinet.

Because there are no exposed hot surfaces or sharp edges, UFH is safer than radiators. There should be no exposed hot or sharp surfaces or piping that might cause damage.

Complete interior design freedom: Because UFH is hidden and radiators take up no space in the home, you have extra wall room to play with. There are no constraints on where furniture may be placed. There are no large white radiators to detract from the design.

UFH may be placed in any style of building. Even during construction. They may be put on both the ground and higher levels and are compatible with boilers and heat pumps. There is no need to replace your existing boiler.

underfloor heating 2

Is underfloor heating feasible in an office?

, , , ,

Underfloor heating is a very comfortable way of heating a room and is ideal for large open areas such as an office. We have warm water underfloor heating in our offices, which heats the office floor uniformly rather than more traditional methods of heating a workspace, such as large heaters or forced hot air systems.

Because it is a radiant heat source, underfloor heating is sometimes referred to as a ‘healthy heating system.’ It is becoming increasingly common in public places such as offices, schools, hospitals, and nursing homes.

electric floor heating

Can Radiant Floor Heating Replace Other Forms Of Heating?

, , ,

Electric in-floor heating is a perfect choice for bathrooms and kitchens because most of those rooms are finished with tile floors that get very cold to walk on in the winter months, and there is something appealing about stepping on a warm floor first thing in the morning to prepare your cup of coffee. Can, or should, this type of heating system be utilized as a primary source of heating outside of kitchens and bathrooms? Instead of using radiators or forced air, depending on the insulation of your property, underfloor heating is a viable option to a primary source of heat.

Is it appropriate for your home?

While tempting, it may not be the best choice for your home. The reason for this is due to your home’s heat loss calculation. The maximum heat output must be greater than the maximum heat loss in order to provide adequate heat to warm the room or residence. If you don’t, this isn’t the suitable heating system for your house. You can determine this by performing a heat loss calculation.

Existing Central Heating System

If you have central heating in your home, you may want to consider replacing it with underfloor heating. You may improve the air quality of your home by changing existing fixtures, such as radiators, because these other types of heating move dust particles and allergens from room to room, irritating anyone who is sensitive to them.

New Construction or Total Renovation?

If you are building a new house or renovating an existing one, now is an excellent time to consider installing one of these systems over other types of heating. One of the most significant benefits of an underfloor heating system is that it allows you to be more creative with how you design your home because you don’t have to worry about where you place furniture in each room. This type of heating also eliminates cold and hot areas because each room maintains a steady and level temperature. Furthermore, when compared to alternative heating solutions, these systems require relatively minimal maintenance.

Having the Best of Both Worlds

If you are renovating your home room by room, or you know you only want radiant floor heating in the bathrooms and kitchen, you can have both types of heating in your home. It may be far more cost effective to install these systems in the rooms your family uses the most and leave the others with the existing heating system, especially if a central heating system is already established. With a decent quality underfloor system, it will last as long as your flooring, if not longer, so you don’t really need to have both in your home unless your budget does not allow for it.

Overall, radiant in floor heating Australia could very well and very efficiently replace traditional methods of heating, particularly in new homes being built. When building a new home, you have the luxury of having this system installed without having to complete renovations or live in a construction zone, allowing you to move into a house with a steady and even natural temperature right immediately. Installing it throughout an existing home would require a significant investment, but it would be well worth it. So, if this is the best option for you, you can be assured that you are installing a system that your family will value for many years to come.

underfloor-heating-inscreed-cable

Inscreed Cable Floor Coverings

, , , , , ,

With Inscreed Cable, almost any floor covering can be considered. Because the heater is securely set in cementitious screed, there is less risk of the heating cable being damaged if the floor covering is replaced on a regular basis. Inscreed Cable is compatible with the following floor coverings:

Tiles

If a tiled floor is installed on top, the Inscreed Cable electric underfloor heating system must be utilized with flexible tile adhesive and grout.

Laminate/Wood

To ensure that heat may flow through laminate or engineered wooden board floors, the flooring must be no more than 18mm thick. If you use soft insulation beneath the flooring, it must be suitable with installation on top of an underfloor heating system.

Concrete

Concrete heats up quickly and maintains heat efficiently, even storing the energy produced by solar gain, making a heated polished concrete floor an excellent choice for increasing the comfort and warmth of your house.

electricity consumption floor heating

Is it true that heated floors consume a lot of electricity?

, , , , , , ,

One of the most common worries regarding radiant heat flooring is the amount of energy the system would consume and its comparability to other services. The good news is, not only is radiant heat comparable, but the efficiency of the system will likely save you money in the long term. Below, we dive into some of the specifics about the amount of electricity heated floors need.

Heated Floor Electricity Specifics

Most heated tile floors and electric floor heating systems consume 12 watts per hour per square foot, which means a 100-square-foot room consumes 1200 watts total per hour. This means that the even, efficient heat provided by a floor heating system might potentially save money almost immediately.

How To Calculate Radiant Heat Costs

By following this approach, you can acquire a prospective estimate of costs:

  1. Determine the square footage of heated space in your facility. You can generate an estimate by multiplying the total square footage of the room by 0.9.
  2. Because most systems utilize 12 watts per square foot, double the heated area by 12.
  3. Now divide the total number of watts by 1000 to get the number of kilowatts the system will use every hour. (KW is the unit of measurement used by electric companies to calculate monthly bills.)
  4. Finally, multiply the number of kilowatts used per hour by the cost of electricity per kilowatt in your area. The average cost per KW is around.12.

Load More